WEBINAR  INVITE   

    New session → Wednesday   

Radio Frequency

Webinar series — every Wednesday!

 

Do not miss the detailed overview of the CENOS™ RF simulation software focusing on frequently discussed topics related to radio frequency simulation.

4 webinars cover the topics:

  1. Basic case setup and Parametric study

  2. Complex geometry creation

  3. Meshing

  4. Phased Arrays in CENOS / Intro into FromCAD

Get an overview of meshing, geometry, and visualizations. You're invited to participate in active discussions with the hosts to learn all about CENOS™ RF simulation software.

The webinar series takes place on a different day each week and covers four different topics.

Thank you for your registration!
You will receive an email with the link to the webinar.

REGISTER

After registration is complete, you will receive a link to the webinar in your email.

 

AGENDA

DAY #1

Wednesday, August 24
Starting @
4 pm Central Europe / 10 am U.S. East Coast
7 am Pacific / 11 pm China 

Basic case setup and Parametric study

  • Basic IFA case creation

  • Parameter setup in FreeCAD

  • Setting up the case in CENOS

  • Result analysis

DAY #2

Wednesday, August 31
Starting @
4 pm Central Europe / 10 am U.S. East Coast

7 am Pacific / 11 pm China 

Complex geometry creation

  • Creating a helical antenna from scratch

  • Setting up the case in CENOS

  • Result Analysis

DAY #3

Wednesday, September 7
Starting @
4 pm Central Europe / 10 am U.S. East Coast

7 am Pacific / 11 pm China 

Meshing

  • Overview of Meshing inside CENOS

  • Intro to manual meshing

  • Mesh validation based on results

DAY #4

Wednesday, September 14
Starting @ 
4 pm Central Europe / 10 am U.S. East Coast

7 am Pacific / 11 pm China 

Phased Arrays in CENOS / Intro into FromCAD

  • Importing CAD files into CENOS

  • Setting up a multi-port Phased Array case

  • Demonstration of beam-steering

Webinar hosts

rainers-leons-justs.jpg

Rainers Leons Justs

 

Simulation Engineer | Radio Frequency

bricia-alvarado.jpg

Bricia Alvarado

 

Simulation Engineer | Radio Frequency

apostolos-spansakis-misirlis.jpg

Apostolos
Spanakis-Misirlis

 

Product Engineer | Radio Frequency

sandis-freimanis.jpg

Sandis Freimanis

 

Product Engineer | Radio Frequency

cenos-radio-frequency-step-1-choose-geometry.png
cenos-radio-frequency-step-2-defince-physics.png
cenos-radio-frequency-step-3-analyse-results.png

Launching RF 2.0

Day #2 Recording

Day #1 Recording

Day #3 Recording

© 2017-2022 CENOS™

CENOS™ Radio Frequency Simulation Software​